Bể gia nhiệt tuần hoàn
có chương trình, 20 lít
Model: CW-20P
Code: AAH52325PK
Hãng sản xuất: JEIOTECH
– Hàn Quốc
Xuất xứ: Hàn Quốc
1.
Tính năng kỹ thuật:
Bộ
điều khiển chương trình hóa thông minh:
-
10
programs available for temperature ramp up and dwell control.
-
10
steps per a program and 99 hours 59 minutes per a step.
-
Stored
programs are easily linkable.
-
Programs
can be repeated up to 99 cycles.
-
Pre-heating
and heating time are settable before program starts.
-
Microprocessor
PID control / automatic tuning / auto run.
Tính
năng vận hành:
-
+5℃
above room temperature to 150℃.
-
Three
point temperature calibration.
-
Digital
timer for delayed ON / OFF. (from 1 min to 99 hr 59 min)
-
Protection
against over-temperature and low fluid level.
-
Digital
input and output control function for interlocking external devices.
-
Colorful
LCD display with interactive input system.
-
Keypad
lock function prevents accidental changes during operation.
-
Splash-proof
keypad.
-
RS-232
interface.(RS-232 to USB serial converter is provided.)
Cấu
trúc:
-
Accurate,
stable, and efficient temperature management by using a powerful variable-speed
pump. (1 to 3 steps of the pump for internal circulation and 4 and 5 steps for
external circulation)
-
Isolated
design of agitator, heater, and sensor by a baffle plate to minimize the
turbulence in the bath fluid and also to protect users and samples against
direct contact.
-
Protection
against low fluid level and dry running by auto-matic shut down of the heater
together with audible and visual alarms.
-
Corrosion-resistant,
seamless, leak-proof, round-cornered, and easy-to-clean stainless steel
reservoir with a drain valve.
-
Powerful
pressure and suction pumps provide contrast pressure and flow rate throughout
the whole temperature range.
-
Quick-release
front grille for easy cleaning of the condenser.
-
Compact
footprints ideal for cramped lab space.
2.
Thông số kỹ thuật:
|
Model
|
CW-05P
|
CW-10P
|
CW-20P
|
CW-30P
|
|
|
Bath Volume (L / cu ft)
|
5 / 0.2
|
10 / 0.4
|
20 / 0.7
|
30 / 1.1
|
|
|
Working Temperature Range 2) (℃ / ℉)
|
Amb. +5 to 150 / Amb. +9 to 302
|
||||
|
Temperature Stability 1) (±℃ / ℉)
|
0.05 / 0.09
|
0.05 / 0.09
|
0.1 / 0.18
|
0.1 / 0.18
|
|
|
Pump
|
Max. Pressure, Max. Flow Rate
|
5.9 PSI (406.8 millibar), 7.4
gallons / minute (28 liters / minute)
|
|||
|
Max. Suction Flow Rate
|
2.6 gallons / minute (10 liters /
minute)
|
||||
|
Dimension
|
Bath Opening / Depth
(W×L, D) (mm / inch) |
150×99, 160
/ 5.9×3.9, 6.3 |
211×154, 180
/ 8.3×6.1, 7.1 |
290×214, 200
/ 11.4×8.4, 7.9 |
300×264, 230
/ 11.8×10.4, 9 |
|
Overall
(W×L×H) (mm / inch) |
220×395×424
/ 8.7×15.6×16.7 |
281×450×444
/ 11.1×17.7×17.5 |
360×510×464
/ 14.2×20.1×18.3 |
370×560×494
/ 14.6×22×19.4 |
|
|
Net Weight (kg / lbs)
|
12.5 / 27.6
|
15 / 33
|
17.5 / 38.6
|
19.5 / 43
|
|
|
Requirements (230V, 50 / 60 Hz)
|
4.5A
|
6.7A
|
8.8A
|
8.8A
|
|
|
Cat. No.
|
AAH52305PK
|
AAH52315PK
|
AAH52325PK
|
AAH52335PK
|
|
1) Technical data according to DIN
12876.
2) If you operate the unit in 1 to 3 steps of pump, the temperature range can be from
Amb. +5℃ but in 4 and 5 steps, the range will be from Amb. +15℃.
*Bath fluid : water
2) If you operate the unit in 1 to 3 steps of pump, the temperature range can be from
Amb. +5℃ but in 4 and 5 steps, the range will be from Amb. +15℃.
*Bath fluid : water
3.
Cung cấp bao gồm:
-
Bể
gia nhiệt tuần hoàn có chương trình 20 lít; Model: CW-20P; Code: AAH52325PK
-
Phụ
kiện tiêu chuẩn
-
Tài
liệu hướng dẫn sử dụng tiếng Anh + tiếng Việt
