Multi-parameter analysers
Model: C3040 •C3041
Manufacture: CONSORT – Belgium
Origin: Belgium
Reference at: http://www.consort.be/
1.
Overview:
pH:
-
Multi-point (1...5)
calibration for more linearity.
-
Selectable
resolution from 0.001 pH to 0.1 pH.
-
Automatic
calibration with any of eleven pre-programmed and five user specified pH
buffers.
-
Accepts pH
electrodes with any zero point (Eo) between ±999 mV.
mV:
-
Features mV
calibration for accurate ORP measurements.
-
Selectable
resolution from 0.1 mV to 1 mV.
Ion:
-
Direct
concentration measurement.
-
Multi-point (2...5)
calibration and an additional blank correction for measuring low
concentrations.
Conductivity:
-
Multi-point (1...3)
calibration for more linearity.
-
An electrode with a
typical cell constant of 1 cm-1 permits to measure from 0.01 µS/cm
to 200 mS/cm in five ranges.
-
An electrode with a
typical cell constant of 0.1 cm-1 permits to measure from 0.001
µS/cm to 20 mS/cm in five ranges.
-
An electrode with a
typical cell constant of 10 cm-1permits to measure from 0.1 µS/cm to
2000 mS/cm in five ranges.
-
Automatically
selects correct range and frequency.
-
Selectable
reference temperature: 20° or 25°C.
-
Automatic
calibration with any of three preprogrammed and three user specified standard
solutions.
-
Allows to lock the
initial conductivity range to avoid non-linear titration curves.
-
Accurate low
conductivity measurements by eliminating the capacitive component of the
electrode and its cable (avoid the use of long cables!).
Dissolved oxygen:
-
Operates with a
galvanic dissolved oxygen electrode requiring no polarisation time and no zero
calibration.
-
Selectable resolution
from 0.01 mg/l (0.1%) to 0.1 mg/l (1%).
-
Automatic air
pressure compensation 600-1300 hPa.
Temperature:
-
Reads temperatures
with 0.1°C resolution.
-
Manual or automatic
temperature compensation (O2: 0...50°C).
-
Calibrates
temperature probe for quality measurements.
Inputs:
-
Two inputs for pH,
mV, Ion, dissolved oxygen or conductivity + corresponding temperature and
reference inputs.
-
Four extra inputs
for pH, mV, Ion or dissolved oxygen + corresponding temperature and reference
inputs.
Outputs: Two versions available:
-
C3040: with USB
communication port (galvanically isolated) and RS232 interface.
-
C3041: with
Ethernet communication port and RS232 interface.
Display:
-
A large bright LCD
screen with white backlight enables to view all
-
channels
individually or simultaneously.
-
Stability indicator
prompts the user when readings should be taken.
-
Hold function
allows to freeze the display for convenient reading or recording.
-
The interactive LCD
screen provides step by step instructions in the language of your choice (English,
Dutch, French, German).
-
Real-time clock
displays time and date.
-
Shows a GLP report
on the LCD screen.
Data-logging:
-
Up to 12000 data
sets can be stored manually or at a programmable interval.
-
Allows to mix data
from all ranges in the same table.
Cabinet:
-
Robust dust and
splash-proof cabinet.
-
An optional wall
mounting kit allows to fix the meter to any wall making more space available on
the desk.
Special features:
-
Two-way
communication with a computer using USB, Ethernet or RS232.
-
Can be programmed
to continue automatically with the measure-ments or data-logging after a power
failure.
-
Password protection
prevents any unauthorised modification of the instrument's settings.
-
No electrical
interference between pH/ORP/Ion and conductivity electrodes in the same
solution.
-
Optional 12 V car
adaptor.
-
Three year
warranty.
GLP:
-
All procedures for
a "Good Laboratory Practice" are on board.
Pre-programmed standards:
-
pH buffers: 1.68,
2.00, 4.00, 4.01, 6.87, 7.00, 9.18, 9.21, 10.01, 12.00, 12.45 (at 25°C).
-
Conductivity: 1413
µS/cm, 12.88 mS/cm, 111.8 mS/cm (at 25°C).
2.
Technical Data:
pH:
-
Range: -2...+16 pH
-
Resolution: 0.001
pH
-
Accuracy: 0.1% ± 1
digit
-
Calibration: 1...5
points
-
Buffers: 11
pre-programmed; 5 user specified
-
Temperature
compensation: -5...+105°C
-
ISO-pH: 6...8 pH
-
Slope: 80...120%
-
Zero point (Eo):
±999 mV
mV:
-
Range: ±2000 mV
-
Resolution: 0.1 mV
-
Accuracy: 0.1% ± 1
digit
-
Calibration: 1
point
ION:
-
Range: 0.01
ng/l...100 g/l
-
Resolution: 3
digits
-
Accuracy: 0.5% ± 1
digit
-
Calibration: 2...5
points + blank
CONDUCTIVITY:
-
Range (cc
dependent): 0...2000 mS/cm
-
Resolution (cc
dependent): 0.001 µS/cm
-
Accuracy: 0.5% f.s.
of range
-
Calibration: 1...3
points
-
Standards:
0.01/0.1/1 M KCl; 3 user specified
-
Cell constant
(cc): 0.07...13 cm-1
-
Temperature
compensation: -5...+105°C
-
Reference
temperature: 20° or 25°C
-
Temperature
coefficient: natural waters (EN27888)
-
Range lock
-
Capacitive
compensation
RESISTIVITY:
-
Range: 0...200 MΩ.cm
-
Resolution: 1 Ω.cm
SALINITY:
-
Range: 0.0...70.0
-
Reference
temperature: 15°C
TDS:
-
Range: 0...100 g/l
-
Resolution: 0.01
mg/l
DISSOLVED OXYGEN:
-
Range: 0...60 mg/l
(0...600%)
-
Resolution: 0.01
mg/l (0.1%)
-
Accuracy: 1% ± 1
digit
-
Calibration: 1
point
-
Temperature
compensation: 0...50°C
-
Salinity
compensation: 0...40
-
Air pressure
compensation: 600...1300 hPa
TEMPERATURE:
-
Range: -5...+105°C
-
Resolution: 0.1°C
-
Accuracy: 0.1°C
-
Calibration: 1
point
AIR PRESSURE:
-
Range: 600...1300
hPa
-
Calibration: 1
point
CHANNELS:
-
Measurement: 6 (conductivity: 2)
-
Temperature: 6
INPUTS:
-
Measurement: 6 BNC,
1012Ω
-
Temperature: 6x2
banana, for Pt1000
CALIBRATION:
-
Reminder: 0...999 h
-
GLP
DISPLAY:
-
LCD: 240x64 pixels
-
White backlight
-
Hold function
-
Selectable
resolution
-
Real time clock
COMMUNICATION:
-
Interface with computer: USB or Ethernet
-
RS232, baud rate:
1200...115200 b/s
-
Printer
DATA-LOGGING:
-
Data sets: 12000 + °C/date/time
-
Modes all
-
Manual or timed
-
Interval: 1...9999
s
SECURITY:
-
Identification number
-
Password protection
AMBIENT CONDITIONS:
-
Temperature: 0...40°C
-
Humidity: 0...95%,
non condensing
POWER SUPPLY:
-
Mains 100...240 VAC, 50/60 Hz
-
Low voltage 9...15
VDC
DIMENSIONS (WxDxH): 26x18x9 cm
WEIGHT: Meter 1 kg
3.
Order Info:
|
Item
|
Code
|
Description
|
|
01
|
C3040
|
pH/Ion/conductivity/DO meter (USB version) + USB cable
|
|
02
|
C3041
|
pH/Ion/conductivity/DO meter (Ethernet version) + UTP
cable
|
|
03
|
SH300
|
Flexible electrode holder (optional)
|
|
04
|
A4800
|
Wall mounting kit (optional)
|
|
05
|
A4049
|
Car adaptor, 12 V (optional)
|
